Hand Piece; Charger; Intensity And Spectral Output - DENTSPLY DeTrey SmartLite PS Manual

SmartLite™ PS
2.2

Hand piece

Due to the compact design of the hand piece the SmartLite PS is very easy and precise to
handle. Pressing the ON/OFF button activates the 10-sec standard cure. Several visual and
acoustic signals give the operator information on the battery status and/or if the LED-tip is
not properly connected to the hand piece.
The hand piece comprises a rechargeable Nickel-Metal-Hydride (NiMH) battery, which
provides a minimum of 150 curing cycles at 10 seconds with a stable power output even at a
low battery charging status. This is achieved by means of a microprocessor-controlled
technology.
2.3

Charger

Four charger types are available adjusted to the specific plugs and voltage of the respective
countries:
EU-plug: 220 – 240 V
UK-plug: 220 – 240 V
US-plug: 110 – 130 V
Japan-plug:
3

Intensity and Spectral Output

By using the Cure Rite™ photometer the intensity of a standardised area is measured and
directly indicated for all lamps.
The SmartLite PS has a powerful 5W LED with an average light output of more than 950
2
mW/cm . This value is comparable to most other LED lights and some more powerful
halogen lights (Figure 1).
90 – 110 V
Scientific Compendium
4 / 22