TESTING – DRYER
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
4-14
27" Stacked Laundry Center
n
For Service Technician Use Only
TEST #5: Door Switch
1. Unplug dryer or disconnect power.
2. Check wire connections at the door switch and Start
switch.
3. With the door closed, check continuity between the two
outer pins on the door switch (see Figure 1).
¾ If there is no continuity, replace the door switch.
4. Reassemble all parts and panels.
5. Plug in dryer or reconnect power.
Note
Figure 1 - Door Switch