Quick Start; Step 1: What's In The Box; Step 2: Gather Accessories - Digi WR64 Hardware Reference Manual

Quick start

Congratulations on your Digi WR64 purchase. The following steps guide you through the setup.

Step 1: What's in the box

When you open the WR64 package, look for the following:
Welcome Card
n
Digi WR64 device
n
Digi WR64 label
n

Step 2: Gather accessories

Digi offers several WR64 accessory kits so you can purchase exactly what you need to support your
WR64. See WR64 support
Here's the list of accessories used in this Quick start:
Digi WR64 Hardware Reference
for a list of accessory kits.
Antennas
Use antennas provided by a Digi accessory kit or use alternate antennas that
comply with the WR64 antenna requirements.
Ethernet cable(s)
If you intend to configure Ethernet at this time, use an Ethernet cable to
n
connect the WR64 WAN/ETH1 port to a WAN.
Use an Ethernet cable to connect the WR64 ETH2 port to a laptop or PC to
n
access the local web interface via a browser.
Phillips-head screwdriver
Use a #1 Phillips-head screwdriver to remove and replace the SIM gasket cover
when installing SIM cards.
Power supply
Use a power supply provided by a Digi accessory kit or use an alternate power
supply that complies with the power supply requirements.
6