Installing And Using Optional Accessories; Articulating Scanning Arm Board - biodex ECONO Operation Manual

Installing And Using Optional Accessories

NOTE: The tools needed to install all table accessories are provided with the table. These include
a 7/16" wrench, a 9/16" wrench and a Phillips screwdriver.

Articulating Scanning Arm Board (058-736)

The optional Articulating Scanning Arm Board is installed by inserting the arm board tube into
the receiving tube located on each side of the table below the Fowler back section. The arm
board pivot is adjustable at any point along its 130° arc. To adjust, press the yellow button on
the arm board and move to the desired location; release yellow button. (See Figures 3 - 6.)
To remove the arm board, press the release button beneath the receiving tube and pull to remove.
Compensator
Allen Key
Adjustment Screw
Figure 3 .
Receiving Tube
Release Button
Figure 5 .
Adjustment Screw
Arm Board Tube
5
Figure 4 . T he a rticulating s canning a rm b oard.
Angle Adjustment Knob
Figure 6 .