biodex ECONO Operation Manual page 22

Declaration of Conformity
Emissions
Manufacturer's declaration on electromagnetic emissions
The Ultrasound Table is intended for use in the electromagnetic environment specified below. The customer or the user of the
Ultrasound Table should assure that it is used in such an environment
Emission test
RF emissions
CISPR 11
RF emissions
CISPR 11
Immunity
Manufacturer's declaration on electromagnetic immunity
The Ultrasound Table is intended for use in the electromagnetic environment specified below. The customer or the user of the
Ultrasound Table should assure that it is used in such an environment.
Immunity test
Electrostatic discharge
(ESD)
IEC 61000-4-2
Compliance
Group 1
Class BB
IEC 60601-1-2
Test level
± 4 kV contact
± 8 kV air
Electromagnetic environment
The Ultrasound Table generates RF energy only for its internal func-
tions. Therefore, its RF emission is very low and is not likely to cause
any interference in nearby electronic equipment
The Ultrasound Table is suitable for use in all establishments
including domestic establishments and those directly connected to the
public low-voltage power supply network supplying buildings used for
domestic purposes.
Electromagnetic environment – guidance
IEC 60601-1-2
Compliance level
Contact±4
Floor should be wood, concrete or ceramic
kV Air ± 8 kV
tiles. If floor is covered with synthetic
material, the relative humidity should be at
least 30%
12