2. ASSEMBLY AND TABLE OPERATION
Relocating The Table
CAUTION: Before moving the table with a patient, make sure side rails are in the up
position and restraining straps are in place to secure the patient.
ATTENTION: Avant de déplacer la table avec un patient, assurez-vous que les rails
latéraux sont dans les courroies hautes de position et de corps en place pour fixer le
patient
This table can be easily moved across smooth surfaces.
To move the table, release each of the four individual wheel lock levers by lifting up on the end of
each lever with your foot.
Once positioned, depress the end of each individual wheel lock lever to lock the table in
position, ensuring stability.
Height Adjustment
Table height is conveniently adjusted with the hand-held controller. D-ring holders are provided
on the end of the straps at each side of the table frame to hold the hand-held
controller when it is not in use. The hand-held controller can be moved to either
side of the table. A power light on the controller indicates that power from the
control box is on.
• To raise the table: press and hold down the table UP button.
• To lower the table: press and hold down the table DOWN button.
NOTE: The control box, located underneath the tabletop, is labeled with controller
specific information.
Fowler Back Adjustment
The motorized Fowler back is infinitely adjustable to 80° via the hand-held
controller.
Leveling The Table
The table has a self-leveling feature which can be used when the table is in a seated position.
• To level the table, press and hold both Fowler back buttons on the hand-held control.
3
Figure 2.
Hand-held
Controller
activates table
positions.
.