Document History - Siemens TC65 Hardware Interface Description

TC65 Hardware Interface Description
Strictly confidential / Draft
0

Document History

Preceding document: "TC65 Hardware Interface Description" Version 00.450
New document: "TC65 Hardware Interface Description" Version 00.521
Chapter What is new
2.1, 3.3.1.4, Modified description of EMERG_RST line: EMERG_RST and additional activation of
3.6 5.3 IGT will reset TC65. EMERG_RST without activation of IGT will switch TC65 off.
2.1, 2.2, Explained different usage of ASC1 and USB depending on Java.
3.10, 3.11
3.3.3.5 Further details on overvoltage shutdown.
3.13.4 New chapter: Digital Audio Interface DAI
5.4 Added new table "Current consumption during Tx burst for GSM 1800MHz and GSM
1900MHz".
7 Added remarks on I
Preceding document: "TC65 Hardware Interface Description" Version 00.302
New document: "TC65 Hardware Interface Description" Version 00.450
Chapter What is new
Throughout IGT line needs to be driven low for at least 400ms
manual
2.1 Updated description of I
3.1 New chapter: Operating Modes
3.3.1 Added remarks on different operating modes.
3.3.3.3 Added remark on shutdown threshold in IDLE mode.
3.5.2 New chapter to describe requirements to control end of charging.
3.5.4 Updated recommended battery specifications.
3.5.7 Added remark on how to switch the module off when in Charging-only mode.
3.6 New chapter: Summary of State Transitions (Except SLEEP Mode)
3.12 More detailed description of AT^SSPI.
3.14.1 Updated forward time of SYNC signal during transmit burst.
5.2 Added remark on temperature tolerances.
5.3 Renamed pins of I2C and SPI.
5.4 Changed table "Current consumption during transmit burst"
TC65_HD_V00.521
2
C, SPI, USB, ASC1. Modified Figure 38.
2
C and SPI.
Page 7 of 99
s
24.05.2005