Siemens TC65 Hardware Interface Description page 13

TC65 Hardware Interface Description
Strictly confidential / Draft
Requirements of quality
IEC 60068
DIN EN 60529
Compliance with international rules and regulations
Manufacturers of mobile or fixed devices incorporating TC65 modules are advised to have
their completed product tested and approved for compliance with all applicable national and
international regulations. As a quad-band GSM/GPRS engine designed for use on any GSM
network in the world, TC65 is required to pass all approvals relevant to operation on the
European and North American markets. For the North American market this includes the
Rules and Regulations of the Federal Communications Commission (FCC) and PTCRB, for
the European market the R&TTE Directives and GCF Certification Criteria must be fully
satisfied.
The FCC Equipment Authorization granted to the TC65 Siemens reference application is
valid only for the equipment described in Section 8.1.
SAR requirements specific to portable mobiles
Mobile phones, PDAs or other portable transmitters and receivers incorporating a GSM
module must be in accordance with the guidelines for human exposure to radio frequency
energy. This requires the Specific Absorption Rate (SAR) of portable TC65 based
applications to be evaluated and approved for compliance with national and/or international
regulations.
Since the SAR value varies significantly with the individual product design manufacturers are
advised to submit their product for approval if designed for portable use. For European and
US markets the relevant directives are mentioned below. It is the responsibility of the
manufacturer of the final product to verify whether or not further standards, recommendations
or directives are in force outside these areas.
Products intended for sale on US markets
ES 59005/ANSI C95.1 Considerations
Products intended for sale on European markets
EN 50360
Note: Usage of TC65 in a fixed, mobile or portable application is not allowed without a
new FCC certification.
TC65_HD_V00.521
Environmental testing
IP codes
for
Electromagnetic Fields (EMFs) from Mobile Telecommunication
Equipment (MTE) in the frequency range 30MHz - 6GHz
Product standard to demonstrate the compliance of mobile phones
with the basic restrictions related to human exposure to
electromagnetic fields (300MHz - 3GHz)
Page 13 of 99
evaluation of human
s
exposure to
24.05.2005