Facotry Reset; Communication Settings - NovaStar VX6s User Manual

VX6s All-in-One Controller
User Manual

3.11 Facotry Reset

You can reset the device to factory settings.
Note:



3.12 Communication Settings

This function is used to set the communication mode and network parameters.
Mode
Figure 3-28 Communication mode


After the reset, Window 1 is kept, with HDMI as the input source. The language
is English and the system mode is Direct by default.
The preset and OSD settings will not be cleared after the reset.
USB first
When the VX6s is connected to the control computer via both the USB and
Ethernet ports, if the communication mode is set as USB First, the control
computer will communicate with the VX6s via the USB port.
LAN first
When the VX6s is connected to the control computer via both the USB and
Ethernet ports, if the communication mode is set as LAN First, the control
computer will communicate with the VX6s via the Ethernet port.
3 Menu Operations
23