Full List Set-Up; Printer Set-Up - Pentair HAFFMANS RPU-352 Instruction Manual

HAFFMANS RPU 352, RPU 353, RPC 80 RPC 50
2
RPC-80 ID set-up
Each RPC-80 can be given its own identification. Press OK to start when the display introduces
SET RPC-80 ID. Set up the ID as required. The ID can have up to 15 characters (letters or
numbers). The ID can also be left blank if you do not require it.

23.8 FULL LIST SET-UP

As well as the normal graph and results it is possible to obtain a printed list of all the recorded
data from a P.U. monitor. This will be printed after the main results page. In this part of the
configuration section it is possible to choose the circumstances under which the full list will be
printed. The list can be printed automatically or the operator can be left to decide if it is required.
The list shows the data for all active channels in tabulated format using the selected units. The
time elapsed since the start of the file is shown in "hours : minutes : seconds" format. If the list
would take up more than 4 pages the operator is offered the chance to abandon printing before
it starts.
NEVER PRINT FULL LIST
The list is never printed and the operator is never asked if the list is required. Playback units are
despatched with this setting.
ALWAYS PRINT FULL LIST
The list is always printed without any intervention by the operator.
ALWAYS ASK
At the end of every print out the operator is asked if the full list is required. The display shows
the simple question PRINT FULL list Now? with YES and No buttons for the reply.
PRINT AFTER PROBLEMS
The list is always printed, without any intervention by the operator, after a run in which a
problem is encountered. A "problem" in this case is an off scale reading on any active channel
or, if templates are in use, a poor or very poor fit to the selected template.
ASK AFTER PROBLEMS
At the end of a print out in which a problem has been encountered the operator is asked if the
full list is required. The display shows the simple question PRINT FULL list Now? with YES and
No buttons for the reply. A "problem" in this case is an off scale reading on any active channel
or, if templates are in use, a poor or very poor fit to the selected template.

23.9 PRINTER SET-UP

PRINTER TYPE
De SELECT Printer TYPE menu offers a choice of printers by name. The RPC-80 is
despatched set for a cannon BJ-10 SX or BJ-200.
PAPER SIZE
De SELECT PAPER size menu offers a choice of UK, USA and European paper sizes by name
and dimensions. The RPC-80 is despatched set for A4 paper size.
RPU 352, RPU 353, RPC 80, RPC 50 Page 71 of 112