Use; Switching On; Connecting The Monitor - Pentair HAFFMANS RPU-352 Instruction Manual

2
21

USE

Warning

21.1 SWITCHING ON

Switch on the mains switch of the RPC-80. The display will light up and briefly show time and
date. The Canon printer must be switched on, don't try to start printing until the "on line" lamp is
lit steadily. Always check that there is enough paper in the Canon printer before starting to use
the RPC-80.

21.2 CONNECTING THE MONITOR

The RPC-80 will now be showing
Connect a monitor that has some files recorded in it, use the same lead to connect to the new
2OO series and the older 100 series monitors. For connections see fig 5.1.
ATTENTION
!
Link to
monitor
Haffmans-REDPOST
Fig 21.1 RPC-80 connections
RPU 352, RPU 353, RPC 80, RPC 50
Read this chapter carefully before using the RPC-80. The RPC-80 is not
waterproof.
"TRYING TO COMMUNICATE WITH MONITOR..."
If the P.U. monitor has two sockets, use socket number 1.
RPC-80
HAFFMANS RPU 352, RPU 353, RPC 80 RPC 50
Mains Power In
On /OFF
Data to printer
DC power to
printer
Page 61 of 112