Graph; Cursor Movement - Pentair HAFFMANS RPU-352 Instruction Manual

2

9 GRAPH

PU cut-off temperature
Indicates that
graph extends
to left
Move cursor
to left
Shows the data in the recorded file as a graph. The temperature (in the selected
display units) runs up the vertical axis and elapsed time (in minutes) runs along
the horizontal.

9.1 CURSOR MOVEMENT

The record under the cursor is shown in detail below the graph. The two switches
below the screen are used to move the cursor. Moving the cursor to the right
moves it towards the end of the file.
The cursor moves by one record as soon as you operate the switch. If you hold
the switch for a short time then the cursor starts to move continuously, slowly at
first and then faster, for as long as the switch is held. When the cursor reaches
the last record in the file the switch outline becomes dim and it no longer has any
effect.
Moving the cursor to the left (towards the start of the file) works in a similar way.
Whenever the cursor is moving, the elapsed time of the record under the cursor
is shown in a panel at the top right of the screen. The ID number of the file is
also shown here.
*
The illustration shows the graph in °C. The details change according to the units selected for the display.
RPU 352, RPU 353, RPC 80, RPC 50
Flashing
cursor
Channel 1 Channel 2
Full details of record under cursor
*
HAFFMANS RPU 352, RPU 353, RPC 80 RPC 50
This panel appears
when cursor moves
Return to
menu screen
Indicates that graph
extends to right
Move
cursor to
right
Page 29 of 112