Table of Contents
Advertisement
CLEANING AT THE END
J
OF THE WORK
•
Reduce pressure to the minimum (turn counterclockwise
the pressure control knob (J1).
-
•
Press the switch (J2) placed on the box of the electric
motor, to stop the equipment.
J2
•
Open the re-circulate safety valve (J3) to release the pres-
sure in the circuit.
•
Eliminate any paint which remains in the tank (J4) by placing
the recirculation tube (J5) into a container.
Ed. 002 - 01/2017
J1
+
ON
J3
J5
•
Turn the pressure adjustment (J6) handle slightly clockwise
to make the machine function at minimum pressure (pump
activated).
•
Empty the tank (J4).
•
Turn the pressure adjustment (J6) handle to minimum
(pump stopped).
•
Insert wash fluid into the tank.
•
Clean the walls of the tank with a brush.
•
Turn the pressure adjustment (J6) handle slightly clockwise
to make the machine function at minimum pressure (pump
activated).
•
Make sure the re-circulation tube is inserted into a container
and wait for clean wash fluid to come out of it (clean).
•
Turn the pressure adjustment (J6) handle to minimum
(pump stopped).
DRAGON LINER
J4
www.larius.eu
17
Advertisement
Table of Contents
