Related Manuals for Larius Dragon Liner
Summary of Contents for Larius Dragon Liner
- Page 1 Self-propelled line striper Dragon Liner Code: 4600 ITALIANO Ediz. 02 - 01/2017...
- Page 2 Larius S.r.l. has a great industrial tradition sectors of industry, plastic, construction, and an innovative technological culture. Larius S.r.l. is the only Italian company wood and horizontal road lining. An investment in Larius is an investment in productivity www.larius.eu...
- Page 3 - Multi-purposes: can be also used as a normal spraying equipment MATERIALS Almost all road marking paints are 100% compatible with water-based products. The LARIUS Airless Line Painters must be used with filtered paint specific for airless applications. AIRLESS LINE STRIPERS APPLICATIONS - Parking lots (schools, hotels, airports, supermarkets, factories, train stations, ports..)
- Page 4 Due to a constant product improvement programme, the factory reserves the right to modify technical details mentioned in this manual without prior notice. This manual is to be considered as an English language translation of the original manual in Italian. The manufacturer shall bear no responsibility for any Due to a constant product improvement programme, the factory reserves the right to modify damages or inconveniences that may arise due to the incorrect translation of the technical details mentioned in this manual without prior notice.
-
Page 5: Table Of Contents
WE ADVISE THE USE OF THIS EQUIPMENT ONLY BY PROFESSIONAL OPERATORS. ONLY USE THIS MACHINE FOR USAGE SPECIFICALLY MENTIONED IN THIS MANUAL. Thank you for choosing a LARIUS S.R.L. product. As well as the product purchased, you will receive a range of support services enabling you to achieve the results desired, quickly and professionally. -
Page 6: Warnings
DRAGON LINER WARNINGS The table below provides the meaning of the symbols used in this manual in relation to using, earthing, operating, maintaining, and repairing of this equipment. Read this operator’s manual carefully before using the equipment. An improper use of this machine can cause injuries to people or things. -
Page 7: Aworking Principle
The line-marker is equip- MIXED LINES ped with a 360° pivoting frontal wheel which even increases the agility of the DRAGON LINER is ideal for medium to large marking and larger models. maintenance jobs. High yield, high efficiency, high versatility. -
Page 8: Btechnical Data
DRAGON LINER TECHNICAL DATA DRAGON LINER Motor power 9 - HP 7 - l/m Max. Delivery Max. pressure 230 bar Airless spray-guns N°2 AT 250 Supply 24 V Sizes of the furnished nozzles 2 x 13-40 - 2 x 17-40 - 2 x 21-40 - 1 x 19-40... -
Page 9: Sectors Of Use
Models Ref.4405 N°1 Filter with pressure gauge Rif. 4600 N°1 High pressure tube 3/16", 10 m Bead distributor for Dragon liner + N°1 Piston surge compensator two spray-guns Auto-traction Ref. 4405/1 N°1 Recirculation tube N°1 50 L gravity tank + closure valve and extractible Bead distributor for Rif. -
Page 10: Cdescription Of The Equipment
DRAGON LINER DESCRIPTION OF THE EQUIPMENT POS. Description POS. Description Airless manual gun AT 250 Product supply tube Flashing light Recirculation tube Internal combustion engine Recirculation - safety valve Laser pointer (if any) Intake filter Manometer High pressure hose Manual airless spray intake valve... - Page 11 DRAGON LINER POS. POS. Description Description Control Head Liner Pumping group Refractive sphere tank (on demand) Electric motor for forward/reverse movement lt. 50 tank Product intake valve AT250 airless spray-gun Arm-lifting and spray-gun electro-valves Ed. 002 - 01/2017 www.larius.eu...
- Page 12 DRAGON LINER POS. POS. Description Description Electric alternator for battery recharging Frontal steering unit Surge compensator Undercarriage structure for egonomic handling Traction battery unit Ed. 002 - 01/2017 www.larius.eu...
-
Page 13: Dtransport And Unpacking
• In case of injuries caused by the gun casting, seek imme- In case of damage, call immediately LARIUS and the diate medical advice specifying the type of the product Shipping Agent. injected. Never undervalue a wound caused by the injection All the notices about possible damage or anomalies of a fluid. -
Page 14: Fsetting-Up
DRAGON LINER SETTING-UP • Never spray over flammable products or solvents in closed places. • Never use the tooling in presence of potentially explosive CONNECTION OF THE AUTOMATIC GUNS gas. • Connect the high pressure flexible hoses (F1) to the fitting... -
Page 15: Washing Of The New Equipment
DRAGON LINER WASHING OF THE NEW EQUIPMENT • Open the fuel tap (F5) and position it to "ON". • The equipment has already been adjusted at our factory with light mineral oil left inside the pumping group as protection. Therefore, wash with diluent before sucking the product. - Page 16 DRAGON LINER • Close the re-circulation valve (F10). • Open the re-circulation valve (F10). • Open the tap (F12) of the manual guns. • Point the guns (F13) at a container keeping (F14) and keep pressed the trigger lever (so as to drain the oil inside) till a •...
-
Page 17: Preparation Of The Paint
DRAGON LINER PREPARATION OF THE PAINT • Make sure the product is suitable to be used with a spray gun. • Mix and filter the product before using it. For filtration use CLOSE-MESH (rif. 214) and LARGE-MESH (rif. 215) LARIUS METEX braids. -
Page 18: Gworking
DRAGON LINER WORKING • Close the re-circulation valve (G3). • Open the taps (G5) and (G6) of the guns. • Turn the pressure adjustment handle (G4) to the necessary SETUP PROCEDURE operating value (120 ÷ 190 bar). • Use the tooling after performing all the SETTING UP ope- rations above described. -
Page 19: Adjusting Pump Unit Speed
DRAGON LINER ADJUSTING PUMP UNIT SPEED • Press the advancement lever (H2) and begin to work based on the set cycle by activating the manual guns control • Move the motor acceleration lever (G8) gently to increase lever or decrease the speed of the pump. -
Page 20: Appendix "A": Unit With Pearlized
DRAGON LINER APPENDIX “A”: UNIT WITH PEARLIZED REFLECTING PAINT DI- STRIBUTION ACCESSORY DESCRIPTION OF THE EQUIPMENT With the new distribution system of reflecting pearl, the “DRA- GON LINER” unit can produce a system of more visible and therefore safer roadway indication, even in the worst weather. -
Page 21: Jcleaning At The End Of The Work
DRAGON LINER CLEANING AT THE END OF THE WORK • Reduce pressure to the minimum (turn counterclockwise the pressure control knob (J1). • Press the switch (J2) placed on the box of the electric motor, to stop the equipment. •... -
Page 22: Kgeneral Maintenance
DRAGON LINER GENERAL MAINTENANCE • Close the re-circulation valve (J3). DAILY • Clean the filters; • Clean the nozzles; • Clean all the varnish circuit with a specific product; • Check the fuel motor (see the maintenance table). PERIODICALLY • Check the pumping gaskets draft (if the product draws, replace gaskets);... -
Page 23: Pressure Switch Seal Check
DRAGON LINER At the start of each working day check that the ring nut is full of hydraulic oil (Ref. 16340). This oil makes it easier for the piston to slide and prevents any material that escapes via the seal gasket drying when the equipment is stopped. -
Page 24: Mdescription Of The Controls
DRAGON LINER DESCRIPTION OF THE M8) Alternator When the red indicator is on, it indicates a malfunction in CONTROLS the alternator required for charging the batteries. M9) Direction selector M1) Driving lever (run) Allows the user to select the machine’s advancement direction;... -
Page 25: Ndragon Liner Control Panel Use
DRAGON LINER DRAGON LINER CONTROL PANEL USE Keep the pressure adjustment handle (N1) at minimum in order to access the various Menus. MENU key HEAD LINER CONTROL SELECT key 01-01-09 LARIUS Set: Att: MENU • Activate by means of a special interrupter “0-1” on the ®... - Page 26 DRAGON LINER MENU 3: SETTING MAINTENANCE HOURS When “MENU” is pressed from point 2, the display reads “3. MAINTENANCE HOURS”. This menu is used to set the n° of HEAD LINER CONTROL hours between successive maintenance tasks. To change the time: SETTINGS 3.
- Page 27 DRAGON LINER MENU 7: LANGUAGE When “MENU” is pressed from point 6, the display reads “7. LANGUAGE”. This menu can be used to set the language. HEAD LINER CONTROL • Press the “SELECT” key to access the page, and the “MENU”...
-
Page 28: Oproblems And Solutions
DRAGON LINER PROBLEMS AND SOLUTIONS Problem Solution Cause Engine won't start • Open the petrol manifold; • • The petrol manifold is closed; • Refill gas tank; • Engine is out of gas; • Use choke; • Cold engine; • Connect spark plug cable or replace •... -
Page 29: Pcorrect Procedure Of Decompression
DRAGON LINER CORRECT PROCEDURE OF DECOMPRESSION Move the switch (P1) to the OFF (0) position to stop the • equipment. • Open the discharge valve (P5) to release the remaining pressure. • Unlock the safety clamp (P2). WARNING: If the equipment is still under pressure after perfor-... -
Page 30: Gaskets
DRAGON LINER REPLACEMENT OF THE PUMPING GROUP’S GASKETS • Pull the ignition belt (Q5) lightly until the piston rod has Each time you use the machine, check for material leaking from been brought to the lowest point of its stroke. -
Page 31: Pit Stop Maintenance
DRAGON LINER Lower seal • Unscrew the pump unit (Q8) from the frontal flange (Q9). • Remove the piston stem (Q10) and remove the pump unit sleeve (Q11); Countersunk side PIT STOP MAINTENANCE Replacement of upper and lower gaskets 20 minutes. - Page 32 DRAGON LINER • Use a size 24 spanner to unscrew the lower stem (Q13); • Unscrew the stem valve (Q15) altogether, check the surface of the ball seating (Q16) that comes into contact with the ball (Q17). If worn, replace them;...
-
Page 33: Upper Seal
DRAGON LINER • Screw the valve stem (Q16) (Ref. 20139) on again and tighten fully, gripping the valve in a vice. To tighten, use a 22 mm spanner; The use of a thread paste is recommended; • Using a screwdriver, remove the second band (Q22) located below the seal (Q21) and insert a new band in the same position;... - Page 34 DRAGON LINER • Remove the OR (Q23-Q24-Q26) from the body of the foot • Screw the locking ring nut (Q19) back onto the body of the valve (Q27) and from the ball seat holder (Q25) and, if pump unit until it makes contact, then loosen it by one turn;...
- Page 35 DRAGON LINER • Check the wear status of the surfaces inside the jacket. Replace it if necessary; • Grease the sleeve (Q29) using a paintbrush; Countersink on the jacket LUBRICATE • Insert the sleeve (Q29) into the lower pump unit (Q30);...
- Page 36 DRAGON LINER • When refitting the pump unit on the machine, the stem • Lubricate the upper crown (Q36) using oil (Q37) (Ref. 16340); must be at its highest point possible. • Insert the stem into the connecting rod and insert the fixing Oil ring pin (Q7).
-
Page 37: Rhigh Pressure Gun At
DRAGON LINER HIGH PRESSURE GUN AT 250 Components Pos. 5 - 11023 - Linkage 11005/3 Ball 11204/1 Ball housing 11205/2 Spring 11205/4 Linkage 11205/5 Sleeve 11205/6 Manifold sleeve 11205/7 Bush Pos. Code Description Pos. Code Description Vedi tab.* Super Fast Clean nozzle... -
Page 38: Scomplete Short Pumping Element
DRAGON LINER COMPLETE SHORT PUMPING ELEMENT WARNING: Always indicate code and quantity for each part required. CORRECT FITTING Ref.30150 SHORT PUMPING ELEMENT Coupled to suction+ circulation hose kit Ref.30175 Tightening pin Ref.20144 CORRECT FITTING Ed. 002 - 01/2017 www.larius.eu... -
Page 39: Liner Type Machines
DRAGON LINER Pos. Code Description Q.ty Pos. Code Description Q.ty Complete short pumping element 30150 30132 Stuffing nut 30113 30144 Tightening ring nut Ball guide 30114 30145 Upper guide band Closing ball 30138 30148 Upper gasket Ball seat holder 30139... - Page 40 DRAGON LINER WARNING: Always indicate code and quantity for each part required. Ed. 002 - 01/2017 www.larius.eu...
- Page 41 Spacer ring 95096 Washer 30659 20537 Bearing Vibration-damping pad 30686 18459 Locking ring Support bush 18475 18470 Tie-rods Dragon Liner support 95066 Washer 53002/4 Self-tightening nut 5756 Self-tightening nut 6151 Screw 96030 Washer 20534 Snap ring for holes 20510 Reduction gear flange...
-
Page 42: Petrol-Powered Dragon
DRAGON LINER PETROL-POWERED DRAGON Ed. 002 - 01/2017 www.larius.eu... - Page 43 DRAGON LINER Pos. Code Description Q.ty Pos. Code Description Q.ty 18186 Motor 18192 Screw 3637 Self-tightening nut 20508 Tie-rods 34009 Washer 95114 Washer 54004 81010 Screw 32005 Washer 20509 Guard 18491 Complete clutch 34008 Screw Ancho 18189 Motor tongue Coil...
-
Page 44: Vbasic Hydraulic Block Ref. 30400
DRAGON LINER BASIC HYDRAULIC BLOCK REF. 30400 WARNING: Always indicate code and quantity for each part required. Ed. 002 - 01/2017 www.larius.eu... - Page 45 DRAGON LINER Pos. Code Description Q.ty Pos. Code Description Q.ty 30401 Block base 37444 Positioning peg 30402 Support bracket 37449 Bush 20457 Digital pressure switch 37281 Spring 20402 37446 Protection Sieve spring 20450 37284 Cable fastener Ring 34009 301013 Washer...
-
Page 46: W 50L Tank
DRAGON LINER 50L TANK TYPE D REF.18238 RICIRCULATION TYPE A RIF.16680/2 RICIRCULATION TYPE B RIF.95037 RICIRCULATION TYPE C RIF.19191/1 TYPE E REF.18225 N°2PZ. TYPE F REF.18225 Pos. Code Description Type Liner Type Type Ricirculation 18249/1 Cover LARIETTE LINER Type E... -
Page 47: Xaccessories
DRAGON LINER ACCESSORIES WARNING: Always indicate code and quantity for each part required PISTON GUNSTOCK FILTERS Code 11039: Green (30M) Code 11038: White (60M) Code 11037: Yellow (100M) Code 11180: L91X 1/4" Code 11019: Red (200M) Code 11120: L91X M16x1,5 Code 95218: FILTER 30 MESH Art. - Page 48 DRAGON LINER ELECTRIC MIXERS: Code 217550: MX 850 Power 850W Code 217560: MX 1100 Power 1080W Code 4038: LASER POINTER Code 217570: MX 1100E Power 1080W Code 4506: ADJUSTABLE SPOTLIGHT Code 4507: FLASHING LIGHT Code 26000: OPERATOR PLATFORM Code 4720: SEAT KIT Ed.
- Page 49 DRAGON LINER Nozzles code TOP-SPRAYING CLEAN TSC 7-20 TSC 19-20 TSC 7-40 TSC 19-40 TSC 9-20 TSC 19-60 TSC 9-40 TSC 21-20 TSC 11-20 TSC 21-40 TSC 21-60 TSC 11-40 TSC 13-20 TSC 23-20 TSC 13-40 TSC 23-40 TSC 13-60...
- Page 50 DRAGON LINER GUN EXTENSION Code 153: cm 30 - Code 154: cm 40 Code 155: cm 60 - Code 158: cm 80 - Code 156: cm 100 PLA 1/4” + FAST-CLEAN TIP INCLUDED Code K11420-K11425-K11430: cm 130-180-240 PLA M16x1,5 + FAST-CLEAN TIP INCLUDED...
- Page 51 Once again a step forward ... Every day we get further to be closer to your work Due to a constant product improvement programme, the factory reserves the right to modify technical details mentioned in this manual without prior notice. This manual is to be considered as an English language translation of the original manual in Italian.
- Page 52 DIRECT LINE CUSTOMERS TECHNICAL SERVICE Tel. (39) 0341.621256 MANUFACTURER: Paint spraying equipment 23801 CALOLZIOCORTE - LECCO - ITALY - Via Antonio Stoppani, 21 TEL. (+39) 0341/62.11.52 - Fax (+39) 0341/62.12.43 E-mail: larius@larius.com - Internet http://www.larius.eu...