Subscribe to Our Youtube Channel
Related Manuals for Larius MIRO LINER
Summary of Contents for Larius MIRO LINER
- Page 1 P A I N T S P R A Y I N G E Q U I P M E N T MIRÓ LINER Line striper with diaphragm pump www.larius.com ENGLISH Ediz. 002 - 11/2012...
- Page 2 Larius S.r.l, founded in 1969, designs and ma- nufactures painting equipment, and transfer and extrusion pumps. Larius S.r.l is a company with a great industrial tradition and an innovative technological culture. Internal production, based on innovation and re- search, is flexible to industry changes in order to achieve the primary objective of creating value.
- Page 3 - Multi-purposes: can be also used as a normal spraying equipment MATERIALS Almost all road marking paints are 100% compatible with water-based products. The LARIUS Airless Line Painters must be used with filtered paint specific for airless appli- cations. AIRLESS LINE STRIPERS APPLICATIONS - Parking lots (schools, hotels, airports, supermarkets, factories, train stations, ports..)
- Page 4 PROFESSIONAL LINER 3000 Medium line marking and road maintenance jobs. DALI’ LINER SELF-PROPELLED Medium line marking and road maintenance jobs EXCALIBUR LINER Medium line marking and road maintenance jobs www.larius.com...
- Page 5 DRAGON LINER SELF-PROPELLED Big line marking and road maintenance jobs EVEREST TH SELF-PROPELLED Big line marking and road maintenance jobs VIKING LINER SELF-PROPELLED Big line marking and road maintenance jobs K2 ECO LINER Medium line marking and road maintenance jobs. www.larius.com...
- Page 6 Due to a constant product improvement programme, the factory reserves the right to modify technical details mentioned in this manual without prior notice. This manual is to be considered as an English language translation of the original manual in Italian. The manufacturer shall bear no responsibility for any damages or inconveniences that may arise due to the incorrect translation of the instructions contained within the original manual in Italian.
-
Page 7: Table Of Contents
WE ADVISE THE USE OF THIS EQUIPMENT ONLY BY PROFESSIONAL OPERATORS. ONLY USE THIS MACHINE FOR USAGE SPECIFICALLY MENTIONED IN THIS MANUAL. Thank you for choosing a LARIUS S.R.L. product. As well as the product purchased, you will receive a range of support services enabling you to achieve the results desired, quickly and professionally. -
Page 8: Warnings
Do not wear bracelets, earrings, rings, chains, or anything else that may hinder the operator’s work. Do not wear clothing with wide sleeves, scarves, ties, or any other piece of clothing that could get tangled up in moving parts of the equipment during the work, inspection, or maintenance cycles. Ed. 002 - 11/2012 www.larius.com... -
Page 9: Aworking Principle
Airless marking has numerous proven benefits with respect to A vast assortment of accessories is available to satisfy every line-markers with pressurised tanks, which have been rendered customer demand. obsolete by airless-technology line markers. Ed. 002 - 11/2012 www.larius.com... - Page 10 MIRÓ LINER 20L tank 50L tank Ed. 002 - 11/2012 www.larius.com...
-
Page 11: Btechnical Data
Tank 50l - 20l Colors Manual line-marking series Applications Small jobs of line marking and road maintenance Multi-use sprayer series Weight 105 kg Lenght (A) 160 cm Height (B) 110 cm Width (C) 90 cm Ed. 002 - 11/2012 www.larius.com... - Page 12 20 cm ~ 6 cm ~ 8 cm ~ 16 cm 25 cm ~ 10 cm ~ 20 cm 30 cm ~ 10 cm ~ 12 cm ~ 23 cm 35 cm ~ 26 cm Ed. 002 - 11/2012 www.larius.com...
-
Page 13: Cdescription Of The Equipment
MIRÓ LINER DESCRIPTION OF THE EQUIPMENT POS. DESCRIPTION POS. DESCRIPTION Product filter Oil discharging cap Pressure valve Oil filter Hydraulic oil filling cap Suction valve Pumping unit Pressure gauge Oil level liht Ed. 002 - 11/2012 www.larius.com... - Page 14 MIRÓ LINER DESCRIPTION POS. DESCRIPTION POS. lt. 50 tank Start-up cord Gun operating lever Cold start-up lever Directional wheel lock/release lever Fuel tap Fuel tank Air filter Accelerator Pivoting wheel Ed. 002 - 11/2012 www.larius.com...
- Page 15 MIRÓ LINER POS. DESCRIPTION POS. DESCRIPTION Recirculation tube AT 250 gun Product feeding tube Spraying gun feeding tube Color unit Brake Recirculation valve Ed. 002 - 11/2012 www.larius.com...
-
Page 16: Dtransport And Unpacking
Unpack the machine and verify if there INDICATED. has been any damage due to transportation. In case of damage, call immediately LARIUS and the • NEVER POINT THE SPRAY GUN AT YOURSELvES OR Shipping Agent. All the notices about possible damage AT OTHER PEOPLE. -
Page 17: Conditions Of Guarantee
- modifications, interventions and maintenance that have not been authorised by the manufacturer; - use of non-original spare parts or parts that do not correspond to the specific model; - total or partial non-compliance with the instruc- tions provided. Ed. 002 - 11/2012 www.larius.com... -
Page 18: Starting The Motor
NEVER use sealants on fittings’ threads. STARTING THE MOTOR In order to start the motor, proceed as follows: • Fill the fuel tank (F7). • Bring the accelerator lever (F11) to about 1/2 of its run. Ed. 002 - 11/2012 www.larius.com... -
Page 19: Washing Of The New Equipment
Therefore, wash with diluent before sucking the product. • Fill the product tank with wash fluid. • Clean the inside of the tank with a brush. • Open the recirculating-safety valve (F15). Ed. 002 - 11/2012 www.larius.com... - Page 20 MAKE SURE THE PRODUCT IS SUITABLE TO BE USED WITH A SPRAY GUN. • Mix and filter the product before using it. For filtration use CLOSE-MESH (rif. 214) and LARGE-MESH (rif. 215) LARIUS METEX braids. Ed. 002 - 11/2012 www.larius.com...
-
Page 21: Gregulations
• Fill the tank (F19) with the paint. REGULATIONS ADJUSTING THE GUN POSITION In order to adjust the position of the spray gun (G1) use the knobs (G2-G3). Ed. 002 - 11/2012 www.larius.com... -
Page 22: Hoperation
In case of injuries caused by the gun casting, seek immediate medical advice • Turn the pressure adjustment handle clockwise until the specifying the type of the product injected. desired setting has been reached. Ed. 002 - 11/2012 www.larius.com... -
Page 23: Icleaning At The End Of The Work
Shut off the motor. • In case of long storage, we recommend you to suck and to leave light mineral oil inside the pumping group and the flexible hose. Follow the washing procedure before using again the equipment. Ed. 002 - 11/2012 www.larius.com... -
Page 24: Jgeneral Maintenance
Check the motor oil every 100 working hours via the relevant more than 15 mm. measuring caps positioned on the bottom of the petrol motor. Top up if necessary. Add a few drops of oil to make operation easier. Ed. 002 - 11/2012 www.larius.com... -
Page 25: Cleaning The Compression Valve
If the quantity of solvent a few minutes later is still identical to that added previously, the ball’s seal in its seating is ensured; Check that the ball seals in its seating as follows: • Turn the valve (I3) upside down; Ed. 002 - 11/2012 www.larius.com... -
Page 26: Replacing Hydraulci Oil
Clean and, if necessary, replace the worn seals (I5). • Replace the plug (I4). • Fill the pump with the recommended oil until it reaches the maximum level. • Then, substitute the oil every 250 hours. Ed. 002 - 11/2012 www.larius.com... -
Page 27: Ltroubleshooting
• Dilute the product, if possible; • The filter of the gun-butt is too fine; • Replace it with a larger-mesh filter; • The atomization is imperfect • The nozzle is worn; • Replace it; Ed. 002 - 11/2012 www.larius.com... -
Page 28: Decompression
Point the gun at the container of the product Clamp released and press the trigger to release pressure. • Loosen very slowly the fitting of connection from the flexible hose to the gun. • Clean or replace the flexible hose and the nozzle. Ed. 002 - 11/2012 www.larius.com... -
Page 29: Spare Parts
32 page 24 25L Tank Ref. 4810 page 30 Filter group Ref. 16200 page 29 Complete color body page 28 Hydraulic body High pressure air gun Accessories page 26 AT 250 page 35 page 33 Ed. 002 - 11/2012 www.larius.com... -
Page 30: Ncomplete Petrol Engine
MIRÓ LINER COMPLETE PETROL ENGINE CASING RIF. 4809 WARNING: Always indicate code and quantity for each part required. Ed. 002 - 11/2012 www.larius.com... - Page 31 4233 18942 Threaded pin 4238M Spacer 81107 Shock absorber 18935 Screw 34008 Screw 34009 Washer 34009 Washer 4244M Machined tang 32024 Washer 4237M Motor flange 81107 Shock absorber 18941 Threaded pin 32024 Washer 34009 Washer Ed. 002 - 11/2012 www.larius.com...
-
Page 32: Ohydrualic Body
MIRÓ LINER HYDRAULIC BODY WARNING: Always indicate code and quantity for each part required. Ed. 002 - 11/2012 www.larius.com... - Page 33 Pressure adjusting valve 52012 Elastic ring 21537 Washer 52013 Ring 91062 Screw M6 x 20 52014 Spring 18909/1 Corteco 21545 Screw M8x45 * Pos. 4-5-9-10 recommended complete spare - Ref. 21648 To be bought already assembled Ed. 002 - 11/2012 www.larius.com...
-
Page 34: Pcomplete Color Body Ref. 21625
21590 Suction valve assembly 21635 Color body 33005 Washer 95284 Union 33004 Screw 53001 33015 Membrane spacer Rapid coupling 33011 Union 96099 Gasket 33012 Washer 21632 Ring BK 33013/4 Stopcock 21633 5255 Elbow 33026 Seal Ed. 002 - 11/2012 www.larius.com... -
Page 35: Qfilter Group Ref. 16200
16201 Filter tank 96204 Filter Base 96020 Spring 96026 Union 16205 Standard sieve 60 96205 Dowel 16204 Standard sieve 100 3279 Articulated joint 3/8” Gas con. 16203 Standard sieve 200 96205 Dowel 16202 Sieve support Ed. 002 - 11/2012 www.larius.com... -
Page 36: Rcomplete 25 L Tank Ref.4810
Pos. Code Description Pos. Code Description 4890 Complete 25L tank 4064 25L tank 4314 Screw 4274 Cinghia 52017 69014 Screw 4308 Ring 4250 Base 4309 Rubber 4111 Complete cover 4109 Cover 16675 Complete suction+delivery system Ed. 002 - 11/2012 www.larius.com... -
Page 37: Scomplete 50 L Tank Rif.4895
Complete 50L tank 4894 Support 18249/1 Cover 96030 Washer 85014 Filter 32024/1 Washer 18231 Support 901568 Screw 18249 50L Tank 18215 Elbow 18246 Support 95032 Union 3637 96099 Seal 96030 Washer 4834 Complete suction+delivery system 901568 Screw Ed. 002 - 11/2012 www.larius.com... -
Page 38: Steering Unit Ref. 4876
MIRÓ LINER COMPLETE FRAME REF. 4874 WITH STEERING UNIT REF. 4876 WARNING: Always indicate code and quantity for each part required. Ed. 002 - 11/2012 www.larius.com... - Page 39 Complete spray gun support unit 4870 Plating 18026 Compensation tube 1/4” 4265 Wire stopper 4923 Fixing plate 4450 91062 Screw 4869 Block 32005 Washer 4461 Wheel 8042 4492 Washer 8079 Technical data label 96030 Washer Ed. 002 - 11/2012 www.larius.com...
- Page 40 Complete linkage 11020 Copper gasket 11008 Trigger gun Filter 11010 Safety lever 11018 Handgrip 11011 Brake washer 11017 Spring 11009 Trigger 32010 Copper gasket 11012 11015 Articulated joints M16x1,5 11013 11155 Articulated joints 1/4” 11034/1 Ed. 002 - 11/2012 www.larius.com...
- Page 41 Art. 150: HIGH PRESSURE MANOMETER GJ 1/4" ANTIPULSATIONS HOSE 1/4" - M16x1,5 max pressure 250 bar Code 35013: 5 mt Code 35014: 7,5 mt Code 35017: 10 mt Art. 4405: Code 18026: 15 mt GLASS BEADS DISPENSER Ediz. 002 - 11/2012 www.larius.com...
- Page 42 Art. K11421-K11426-K11431: cm 130-180-240 Art. 16780: TELESCOPIC PAINT ROLLER complete with: n. 1 Roller with extra-long fiber n. 1 Roller with long fiber n. 1 Roller with medium fiber Flexible hose mt. 2 3/16 " M16x1,5 Ediz. 002 - 11/2012 www.larius.com...
- Page 43 SFC25-60 SFC15-20 SFC43-40 SFC27-20 SFC15-40 SFC43-60 SFC27-40 SFC15-60 SFC43-80 SFC27-60 SFC17-20 SFC51-40 SFC27-80 SFC17-40 SFC51-60 SFC29-20 SFC17-60 SFC51-80 SFC29-40 SFC19-20 SFC29-60 SFC19-40 SUPER FAST-CLEAN TIP Art. 18280: GASKET Art. 18270: SUPER FAST-CLEAN base UE 11/16x16 Ediz. 002 - 11/2012 www.larius.com...
- Page 44 L’innovazione. Quella vera. PAINT SPRAYING EQUIPMENT...
- Page 45 L’innovazione. Quella vera. PAINT SPRAYING EQUIPMENT...
- Page 46 L’innovazione. Quella vera. PAINT SPRAYING EQUIPMENT...
- Page 47 P A I N T S P R A Y I N G E Q U I P M E N T OUR FUTURE IS GRANTING YOU QUALITY... www.larius.com...
- Page 48 S P R A Y I N G E Q U I P M E N T 23801 CALOLZIOCORTE - LECCO - ITALY - via Antonio Stoppani, 21 Tel. (39) 0341/62.11.52 - Fax (39) 0341/62.12.43 E-mail: larius@larius.com - Internet http://www.larius.com www.larius.com...
Need help?
Do you have a question about the MIRO LINER and is the answer not in the manual?
Questions and answers