Table of Contents
Advertisement
F14
•
As soon as the pump begins to run dry, turn the handle
(F9)to minimum to stop the pump.
F9
-
Absolutely avoid spraying solvents in closed envi-
ronments. It is also recommended to keep the spray
gun away from the pump in order to prevent vapours
from coming into contact with the electrical motor.
•
Stop the combustion engine.
•
At this point the machine is ready. If water-based paints
are to be used, after the wash with solvent wash the tank
again with soap and water, then rinse with clean water
(repeating the previously described procedures).
•
Insert the guns trigger lock and assemble the nozzle.
Ed. 002 - 01/2017
PREPARATION OF THE PAINT
•
Make sure the product is suitable to be used with a spray
F13
gun.
•
Mix and filter the product before using it. For filtration
use CLOSE-MESH (rif. 214) and LARGE-MESH (rif. 215)
LARIUS METEX braids.
Make sure the product to be used is compatible
with the materials employed for manufacturing the
equipment (stainless steel and aluminium). Because
of that, please contact the supplier of the product.
•
Fill the tank (F11) with the paint.
+
Never use products containing halogen hydrocarbons (as
methylene chloride). If these products come into contact with
aluminium parts of the equipment, can provoke dangerous
chemical reactions with risk of explosion.
DRAGON LINER
F11
www.larius.eu
13
Advertisement
Table of Contents
