Table of Contents
Advertisement
WASHING OF THE NEW EQUIPMENT
•
The equipment has already been adjusted at our factory
with light mineral oil left inside the pumping group as
protection. Therefore, wash with diluent before sucking
the product.
•
Fill the product tank with wash fluid.
•
Clean the inside of the tank with a brush.
•
Ensure the gun (F3) is without nozzle.
Press the switch (F4) of the equipment "ON" (I).
•
•
Pull the lever (F4) for the first cold start up.
Ed. 002 - 01/2017
F3
F4
F4
•
Open the fuel tap (F5) and position it to "ON".
F5
•
Bring the accelerator lever (F6) to about 1/2 of its run.
•
Pull the start up cord (F7).
F7
Turn the equipment's switch (F8) to ON (I) in order to enable
•
the control Head Liner panel.
•
Turn pressure regulating knob (F9) clockwise a little so
that the machine idles.
DRAGON LINER
F6
www.larius.eu
11
Advertisement
Table of Contents
