Related Documentation - Sun Microsystems J4200 Replacement Manual

The alarm shuts off after connecting the second power cord.
■
If an alarm sounds after plugging in the first power cord, the alarm will shut off
once the second power cord is connected.

Related Documentation

Application
Regulatory and safety
information
Multilanguage safety
information
Site planning information
Installation at a glance
Complete details of the
hardware components, rail
and tray installation, and
cabling
Late-breaking information
not included in the
information set
Installation and use of the
management software using
a GUI
Installation and use of the
management software using
a CLI
General operation and
troubleshooting
Disk drive replacement
procedures
SIM board replacement
procedures
Power supply replacement
procedures
18 Sun Storage J4200 Array Chassis Replacement Guide • April 2008
Title
Sun StorageTek Regulatory and Safety
Compliance Manual
Important Safety Information for Sun
Hardware Systems
Sun Storage J4200/J4400 Array Site
Preparation Guide
Sun Storage J4200 Array Setup Poster
Sun Storage J4200 Array Hardware
Installation Guide.
Sun Storage J4200/J4400 Array Release
Notes
Sun StorageTek Common Array Manager
User Guide for the J4000 Array Family
Sun StorageTek Common Array Manager
CLI Guide for the J4000 Array Family
Sun Storage J4200/J4400 Array Overview
Sun Storage J4200/J4400 Array Disk Drive
Replacement Guide
Sun Storage J4200 Array SIM Board
Replacement Guide
Sun StorageJ4200 Array Power Supply
Replacement Guide
Part Number
96272, Revision A
816-7190-nn
820-3219-nn
820-3221-nn
820-3218-nn
820-2222-nn
820-3765-nn
820-4419-nn
820-3223-nn
820-3225-nn
820-3226-nn
820-3227-nn