6
INTRODUCTION
The portable gas conditioning systems PSS-5 and PSS-5/3 have been especially designed, so that
precise gas analysis can be carried out in any place and at any time.
The entire gas conditioning system is housed in a compact and robust aluminium framed protective
case which ensures that the components can be removed easily, and gas analysis carried out quickly,
safely and with a minimum amount of maintenance.
7
APPLICATION
The gas conditioning system is ideally suited for both intermittent and continuous operation.
The components of the PSS-5 and PSS-5/3 systems are intended for "standard use." We also provide
a wide range of additional equipment and other components if special measurements are required.
Gas sample probe, stainless steel 316, Ø 4/6 mm, length 0.5 m
Gas sample line, PVC hose, Ø 4/6 mm, length 3 m
Gas cooler ECP1000 or ECP3000
Fine filter FP-2T, filter element fineness 2 µm
Sample gas diaphragm pump N3KPE or N9KPE
Pre-filter PF 2
Peristaltic pump SR25.1 for continuous removal of condensate
Figure 1
PSS-5 and PSS-5/3 gas flow diagram
8
PSS-5 | 1.00.03
www.mc-techgroup.com