Table of Contents
Advertisement
A
: C
PPENDIX
The steps in this appendix provide an alternative way to install the IR on your
network, by using a crossover cable and configuring the application via the user
interface.
Preliminary Setup
Create a "setup workstation" using a Windows-based laptop or desktop machine
with a network card and Internet Explorer 7.0 (or later). The setup workstation will
be used for accessing the IR server on the network and configuring the unit.
NOTE: The Java Plug-in version specified for the Web Filter software version must be
installed on your workstation. If your workstation does not have Java Runtime Environ-
ment, you will be prompted to install it.
Workstation Configuration
A. From the desktop of the setup workstation, while logged in with Administrator
privileges, follow the procedures for your machine type:
• Windows XP: Go to Start > Control Panel. Open Network Connections.
Right-click the link for LAN or High-Speed Internet and choose Properties.
• Windows Vista: Go to the start icon > Control Panel > Network and Internet
> Network and Sharing Center > Manage network connections. Right-click
the Local Area Connection you want to change, then choose Properties.
• Windows 7: Go to the start icon > Control Panel. In the search box, type
adapter. Under Network and Sharing Center, choose View network connec-
tions. Right-click the Local Area Connection you want to change, then choose
Properties.
B. On a Windows XP machine, click on Internet Protocol (TCP/IP) to highlight it.
On a Windows Vista or Windows 7 machine, go to the Networking tab. Under
This connection uses the following items, choose Internet Protocol Version 4
(TCP/IPv4) to highlight it.
C. Click the Properties button.
WARNING: Be sure to make note of the current network settings on the setup workstation
as you will need to return them for further setup procedures.
D. Choose the option Use the following IP address.
E. Type in the IP address of 1.2.3.1.
F. Type in the Subnet mask (netmask) of 255.0.0.0 and click OK.
G. Close the LAN connection properties box.
M86 S
I
G
ECURITY
NSTALLATION
UIDE
S
ONSOLE
ETUP
A
: C
S
PPENDIX
ONSOLE
ETUP
P
ROCEDURES
P
P
ROCEDURES
RELIMINARY
S
ETUP
93
Advertisement
Table of Contents
