Monitor The Library Update Process - M86 Security MSA Installation Manual

I S S
NSTALL THE ERVER TEP

Monitor the Library Update Process

50
4: S L U
ET IBRARY PDATES
To verify that the library is being updated:
A. From the navigation panel, click Updates and select Library Update Log from
the menu.
B. In the Library Update Log window, click View Log to display the update activity:
NOTE: You will be notified in the log when the library has been completely updated by the
message: "Full URL Library Update has completed." If this message does not yet display,
click View Log again to view the latest information.
WARNING: At the conclusion of this step, your Web Filter will be actively filtering your
network. The Web Filter is initially set to filter pornography sites on all of your network
traffic associated with the hub to which it is connected.
Now that the Web Filter is filtering your network, the next step is to set up groups
and create filtering profiles for group members.
To activate a default filter profile more appropriate for your operations, or to specify
a more limited IP range to filter, consult Chapter 2: Group screen in the Global
Administrator Section of the M86 IR Web Filter User Guide. Refer to Chapter 1:
System screen for information on how to give end users access to acceptable
HTTPS sites if strict HTTPS filtering settings are used.
Obtain the latest M86 IR Web Filter User Guide at http://www.m86security.com/
support/R3000/documentation.asp
For troubleshooting tips, visit http://www.m86security.com/software/8e6/ts/
r3000.html
IMPORTANT: M86 Security recommends reviewing the Best Filtering Practices section to
implement setup procedures for the filtering scenarios described within that section.
M86 S I G
ECURITY NSTALLATION UIDE