Table of Contents
Advertisement
F. Enter the Gateway IP address for the default router or firewall that is the main
gateway for the entire network. The Web Filter will use this IP address to
communicate outside the network.
WARNING: Be sure to take note of the LAN 1 and LAN 2 IP addresses and host
name you assigned to the Web Filter. It is strongly suggested you document and
store this information as it is now the only way of communicating with the Web
Filter.
G. Click Apply.
Network: NTP Servers
From the navigation panel, click Network and choose NTP Servers from the menu:
The NTP Servers window is used for specifying the Network Time Protocol (NTP)
servers to be used by the Web Filter, so that the Web Filter is synchronized with
computer clocks on the Internet.
Note that the following server IP addresses display in the Servers list box:
128.59.35.142, 142.3.100.15, 129.132.98.11. If necessary, any of these servers
can be deleted by selecting the IP address and clicking Delete.
NOTE: If you need to find another NTP server to use, most university Web sites provide
these servers for public usage.
A. In the NTP Server field, enter the IP address of the primary NTP server you
wish to use for clock settings on your server.
B. Click Add to include this IP address in the Servers list box.
C. Enter two more NTP servers, following the procedures in sub-steps A and B.
These will be the secondary and tertiary NTP servers, in order as they appear in
the list box.
D. Click Apply.
NOTE: If the primary server fails, the secondary will be used. If the secondary server fails,
M86 S
I
G
ECURITY
NSTALLATION
UIDE
A
: C
S
PPENDIX
ONSOLE
ETUP
P
N
S
ROCEDURES
ETWORK
ETUP
103
Advertisement
Table of Contents
