Install The Chassis Into The Rack - M86 Security MSA Installation Manual

P S P
RELIMINARY ETUP ROCEDURES

Install the Chassis into the Rack

14
R M S
ACK OUNT THE
CAUTION: Before installing the chassis into the rack:
• Make sure that the rack is securely anchored onto an unmovable surface or structure
before installing the chassis into the rack.
• Unplug power cord(s) of the rack before installing the chassis into the rack.
• Make sure that the system is adequately supported. Make sure that all the components
are securely fastened to the chassis to prevent components falling off from the chassis.
• The rack assembly should be properly grounded to avoid electric shock.
• The rack assembly must provide sufficient airflow to the chassis for proper cooling.
• Please make sure that all components and all chassis covers are properly installed in
the chassis before you install the chassis into the racks; otherwise, out-of-warranty
damage may occur.
Slide the chassis into the rack and secure it with two screws on each side of the
rack as shown in the picture.
ERVER
M86 S I G
ECURITY NSTALLATION UIDE