Chapter 4: Getting Started; Initial Setup; Access The Administrator Console; Log On - M86 Security M86 Web Filter User Manual

I S
NTRODUCTORY ECTION

Chapter 4: Getting Started

Initial Setup

Access the Administrator Console

50
C 4: G
HAPTER ETTING
To begin setting up your Web Filter server, follow the instruc-
tions in the M86 Web Filter Installation Guide, the booklet
packaged with your Web Filter unit. This guide explains how
to perform the initial configuration of the server so that it can
be accessed via an IP address or host name on your
network, and the SSL certificate for the Web Filter gener-
ated to ensure a secure network connection.
NOTE: If you do not have the M86 Web Filter Installation Guide,
contact M86 Security immediately to have a copy sent to you.

Log On

1. Launch an Internet browser window supported by the
Web Filter.
2. In the address line of the browser window, type in
"https://" and the Web Filter server's IP address or host
name, and use port number ":1443" for a secure network
connection, plus "/login.jsp".
For example, if your IP address is 210.10.131.34, type in
https://210.10.131.34:1443/login.jsp. Using a host
name example, if the host name is logo.com, type in
https://logo.com:1443/login.jsp.
With a secure connection, the first time you attempt to
access the Web Filter's user interface in your browser
you will be prompted to accept the security certificate. In
order to accept the security certificate, follow the instruc-
tions at: http://www.m86security.com/software/8e6/
docs/ig/misc/sec-cert-wf.pdf
S
TARTED
M86 S U G
ECURITY SER UIDE