Non-Quick Start Procedures Or Settings; Reboot System; Change Quick Start Password; Reset Admin Console Account - M86 Security MSA Installation Manual

I S S
NSTALL THE ERVER TEP

Non-Quick Start procedures or settings

Reboot system

Change Quick Start password

Reset admin console account

28
1A: Q S S P
UICK TART ETUP ROCEDURES
The options described below do not pertain to the quick start setup process.
A. From the Quick Start menu, press B to go to the Reboot confirmation screen.
B. At the Really reboot the system? prompt, press Y to continue, or press any
other key to cancel reboot.
A. From the Quick Start menu, press C to go to the Change Administrator Pass-
word screen.
NOTE: This option will change the password used for accessing the Quick Start menu (the
default password being #s3tup#r3k) but will not change the password used for accessing
the Web Filter login screen. Option D, "Reset Admin account", should be used for reset-
ting the Web Filter Administrator console username and password to the factory default
'admin'/'user3' and for unlocking all IP addresses currently locked.
B. At the Enter the new administrator password prompt, type in the new pass-
word to be used for accessing the Quick Start menu and press Enter.
C. At the Re-enter the new administrator password prompt, re-type the pass-
word you just entered and press Enter, or press Esc to cancel the change.
A. From the Quick Start menu, press D to go to the Reset admin GUI account
confirmation screen that displays the following message:
Reset admin account password? Are you sure?
NOTE: This process will also unlock the admin account and unlock all currently
locked IPs.
NOTE: This option resets the Web Filter Administrator console username and password
to the factory default 'admin'/'user3' and will unlock all IP addresses currently locked.
B. Press Y to continue, or press any other key to cancel admin account reset.
M86 S I G
ECURITY NSTALLATION UIDE