Table of Contents
Advertisement
System Status screen
The System Status screen contains the following information:
• Serial Number assigned to the chassis
• Operation Mode specified in screen 3 (Change filter mode)
• Capturing Interface specified in screen 4 or 5 (Configure network interface
LAN1 or LAN2)
• Management and Blocking Interface specified in screen 4 or 5 (Configure
network interface LAN1 or LAN2)
• lan1 IP address and netmask specified in screen 4, and current status ("Active"
or "Inactive")
• lan2 IP address and netmask specified in screen 5, and current status ("Active"
or "Inactive")
• Default gateway IP address specified in screen 6 (Configure default gateway)
• Web Filter host name specified in screen 8 (Configure host name)
• DNS server IP address(es) specified in screen 7 (Configure DNS servers)
• Regional timezone setting specified in screen 9 (Time Zone regional setting)
• Current status of the Web Filter
• Current Web Filter software Version installed
• Library update status
• Current status of the ER
NOTE: Modifications can be made at any time by returning to the specific screen of the
Quick Start procedures.
Log Off, Disconnect the Peripherals
A. After completing the Quick Start setup procedures, return to the Quick Start
menu screen and press 9 to log out.
B. Disconnect the peripherals from the IR.
Proceed to Step 2: Physically Connect the IR to the Network.
M86 S
I
G
ECURITY
NSTALLATION
UIDE
I
S
S
1A: Q
NSTALL THE
ERVER
TEP
S
S
P
UICK
TART
ETUP
ROCEDURES
29
Advertisement
Table of Contents
