Step 1A: Quick Start Setup Procedures; Link The Workstation To The Ir; Monitor And Keyboard Setup; Serial Console Setup - M86 Security MSA Installation Manual

I S S
NSTALL THE ERVER TEP

Step 1A: Quick Start Setup Procedures

Link the Workstation to the IR

Monitor and Keyboard Setup

Serial Console Setup

20
1A: Q S S P
UICK TART ETUP ROCEDURES
A. Connect the PC monitor and keyboard cables to the rear of the chassis (see
Fig. 1).
B. Turn on the PC monitor.
C. Connect the AC power cord to the back of the chassis and plug the cord into a
UPS power supply unit.
D. Power on the IR by dropping down the face plate and pressing the large button
at the right of the front panel (see Fig. 2).
Once the IR is powered up, proceed to the Login screen instructions.
A. Using the serial port cable (and USB DB9 serial adapter, if necessary), connect
the laptop to the rear of the chassis (see Fig. 1).
B. Power on the laptop.
C. Connect the AC power cord to the back of the chassis and plug the cord into a
UPS power supply unit.
D. Power on the IR by dropping down the face plate and pressing the large button
at the right of the front panel (see Fig. 2).
Fig. 1 - Portion of MSA chassis rear
Fig. 2 - Diagram of MSA chassis front panel, power button at far right
Once the IR is powered up, proceed to the instructions for HyperTerminal Setup
Procedures.
M86 S I G
ECURITY NSTALLATION UIDE