Synchronized, Non-Synchronized Items - M86 Security M86 Web Filter User Manual

Hide thumbs Also See for M86 Web Filter:

Table of Contents

Synchronized, Non-Synchronized Items

YNCHRONIZING

It is important to note that while some items are synchro-

nized to the target Web Filters, they do not become perma-

nent configurations on the target Web Filter. These items

are in essence functionally synchronized, since they are

configurations that the target Web Filters will read from the

source Web Filter upon load. These items will then be

updated on an as needed basis from the source Web Filter.

For purpose of differentiation, these items will be referred to

as functionally synchronized for purposes of this user guide.

These functionally synchronized items will be available for

use on the target Web Filter.

The following options are available for synchronization:

Synchronize all items (both profile and library changes), and

synchronize only library items.

As you will see by the lists on the following pages, static

configuration options—such as library changes—will be

synchronized. All active options—such as profile changes—

will be functionally synchronized. One time configuration

options on the Web Filter—such as reporting configurations,

or IP addresses—will not be synchronized.