Step 1A: Quick Start Setup Procedures; Link The Workstation To The Wfr; Monitor And Keyboard Setup; Serial Console Setup - M86 Security 350 Installation Manual

I S S
NSTALL THE ERVER TEP

Step 1A: Quick Start Setup Procedures

Link the Workstation to the WFR

Monitor and Keyboard Setup

Serial Console Setup

16
1A: Q S S P
UICK TART ETUP ROCEDURES
A. Connect the PC monitor and keyboard cables to the rear of the WFR chassis.
B. Turn on the PC monitor.
C. Proceed to the next set of instructions: Power on the WFR.
A. Using the serial port cable (and USB DB9 serial adapter, if necessary), connect
the laptop to the rear of the chassis (see "serial port" in Fig. 1 for a 300 series
unit or Fig. 2 for a 500 series unit).
Fig. 1 - Rear of 300 series chassis with serial port identified
Fig. 2 - Portion of 500 series chassis rear with serial port identified
B. Power on the laptop.
C. Proceed to the next set of instructions: Power on the WFR.
M86 S I G
ECURITY NSTALLATION UIDE