Scheduled Maintenance; Grinder Wear Automatic Check; Water Softener Regeneration - Astoria Tempesta SAEP Use And Maintenance Manual, Instructions For The User

Scheduled maintenance

9.3
If enabled, this function displays a message to alert
the user when it is necessary to perform scheduled
maintenance.
The first request for assistance appears when the
number of coffee, tea, heating unit filling cycles, or the
number of days elapsed since installation of the machine,
is close to the programmed threshold value.
After reaching the programmed threshold value, the
display shows a window with messages:
Press the icon to read the message:
WARNING: Maintenance threshold A
This message continues to be displayed until main-
tenance is performed.
If enabled, the display may show various scheduled
maintenance thresholds.
The threshold reached/exceeded warnings do not
prevent the machine from operating.
The messages on the display can be reset at any
time (also before the warning is triggered) and can be
performed by the technician.
When the machine is in operation, the system in-
creases both the cycle counter and time since installation
counter.
Contact a Qualified Technician to programme this function.
34 44
of

Grinder wear automatic check

9.4
If enabled, this function displays a message to alert
the user that it is necessary to replace the grinder-
dispenser burrs.
WARNING: Burr wear and tear
The warning appears when the amount of coffee used
(kg) reaches the programmed limit.
The message will remain on the display in the selec-
tion standby phase or the programming standby phase.
The warning for reached/exceeded thresholds does
not prevent the machine from functioning.
The count can be reset at any time (even before the
warning is triggered) and by a technician.
The system only operates if the machine is paired with a single
grinder. Contact a Qualified Technician to programme this function.

Water softener regeneration

9.5
The machine counts the amount of water that has
been used (see para. 8.8 on page 32) and if enabled,
indicates the need to regenerate the softener on the
display when the programmed amount is exceeded.
WARNING: Water softener regeneration
The warning for reached/exceeded thresholds does
not prevent the machine from functioning.
The count can be reset at any time (even before the
warning is triggered) by a technician.
Contact a Qualified Technician to programme this function.
To regenerate the water softener, follow the manufacturer's
instructions.
USER Manual