Constant (Const) - ABB i-bus KNX ABA/S 1.2.1 Product Manual

®
ABB i-bus KNX
Parameters
7.10.34

Constant (CONST)

Description
The constant can be used, for example, for the purposes of comparison with other input variables. The
constant never triggers a recalculation.
Outputs
No. DPT
1
Parameters
Name
Constant
Value
94 2CDC509086D0201 | ABA/S 1.2.1
Abbr.
Any O
Value
According to DPT Always
Name Visible
Output Always
Visible Description
For entering a constant value.
Selecting the checkbox sets the initial value to 1, but
only with 1-bit values. Deselecting it sets a value of 0.
Description