ABB i-bus KNX ABA/S 1.2.1 Product Manual page 92

®
ABB i-bus KNX
Parameters
Parameters
Name
Controller type
Proportional
Coefficient
Integral Time
Integral Time as
input
Derivative Time
Derivative Time
as input
Limit output
value, anti-wind-
up
Lower limit
Upper limit
Description of parameters
Controller type:
Value
P (Proportional)
PI (Integral)
PD (Derivative)
PID
If the controller type is P (Proportional), the integral value and derivative value are always 0.
92 2CDC509086D0201 | ABA/S 1.2.1
Value
- Proportional (P)
- Integral (PI)
- Derivative (PD)
- PID
Float value,
default = 60
Float value in [min],
default = 90,
0 not permitted
- yes
- no
Float value in [s],
default = 1
- yes
- no
- yes
- no
Float value,
default = 0
Float value,
default = 255
Description
Proportional controller. The integral and derivative coefficients are 0.
Proportional integral controller. The derivative coefficient is 0.
Proportional derivative controller. The integral coefficient is 0.
Proportional integral derivative controller.
Visible Description
Always
Always
If Controller Integral time in [s]; typical
type = PI or PD range: 60...900 s
If Controller
type = PI or PD
If Controller
Derivative time in [s]; typical
type = PD or
range: 1...10 s
PID
If Controller
type = PD or
PID
Limits the output value to a
range. If this range is exceeded,
Always a limit is imposed on the integral
value of the controller ("anti-
wind-up").
Always
Always