®
ABB i-bus
KNX
Parameters
Function
•
If the current time is between the Start and End times AND the Active input = 1 (true):
o
•
Start time greater than End time:
o
•
Active input = 0 (false):
o
•
Active input = 1 (true):
o
•
Whole time input = 1 (true) AND Active input = 1 (true):
o
o
The output sends if the start or end time will be reached.
Exception handling and start-up behavior
The element does not work if:
•
The system time is invalid.
•
Start or End have invalid or no values.
The funktion element only works with start and end time. The weekdays contained in the DPT are
ignored.
Output = 1 (true)
Output = 0 (false)
The output remains unchanged.
The output is recalculated and updated accordingly.
Output = 1 (true)
The element reacts as if the Start and End time were both 00:00.
Hinweis
ABA/S 1.2.1 | 2CDC509086D0201 75