Simulation - ABB i-bus KNX ABA/S 1.2.1 Product Manual

®
ABB i-bus KNX
Parameters
7.4

Simulation

Fig. 8: Simulation
Simulation/Stop
Speeds
Single Step
Slow
Realtime
Fast
Simulation time
34 2CDC509086D0201 | ABA/S 1.2.1
Starts and stops the simulation.
Used to select simulation speeds.
Important for simulating timer functions such as Calendar.
Clicking Next Step starts a calculation cycle.
Around 50 times slower than real time.
Simulation is done in real time.
1 second in the simulation is 1 hour in real time.
Sets the simulation time and date.
Customize button:
Applies the setting.
Refresh button:
Synchronizes the date and time with the real time of the PC.