®
ABB i-bus
KNX
Parameters
7.7
In operation parameters
7.7.1
Send Group Object "In Operation" (1-bit)
Options:
The In operation group object indicates that the device is communicating correctly with the KNX bus.
Depending on the setting, a 0 or 1 is sent cyclically and activates the 1-bit group object In operation.
The cyclical telegram can be evaluated by other devices on the bus.
7.7.2
"In Operation" is repeated every
Options:
36 2CDC509086D0201 | ABA/S 1.2.1
No
Send value 0 cyclically
Send value 1 cyclically
00:00:01...01:00:00...11:59:59 hh:mm:ss