6.
Connect internal connections if needed. See Board
Layout on page 2 for more details.
7.
Replace the computer cover and reconnect the power
cord.
Windows Driver Installation
The USB 2.0 5-Port PCI has three built-in USB hosts. Two
hosts handle USB 1.1 devices and the third host handles
USB 2.0 devices. USB 1.1 and USB 2.0 devices are
automatically routed to the correct USB hosts.
Windows 98SE
1.
Install the board and boot up your system. At the
Add New Hardware Wizard, click Cancel three
times.
2.
Insert the driver CD. Click Start, Run, type in
X:\setup.exe, then click OK. (Replace X: with the
drive letter of your CD-ROM)
4
Figure 3. Inserting the PCI board