Advertisement
Quick Links
USB 2.0 9-in-1 Bay R/W
Quick Installation Guide
Introducing the Bay Reader/Writer
The Bay Reader/Writer is the perfect choice for computer
users looking for a flash memory card reader/writer
that installs into a front drive bay of the computer.
Features and Benefits
•
Compliant with USB specification rev. 2.0
•
Fits into either 3.5" or 5.25" (with included mounting
rack) drive bay
•
Dedicated Power/Activity LED for each memory
slot
•
Works with CompactFlash (CF) Type I & Type II,
Microdrive, SmartMedia (SM), SecureDigital (SD),
MultimediaCard (MMC) and Memory Stick
(incl. MagicGate & Pro) memory cards
System Requirements
•
PC computer with an internal USB port
(USB 2.0 recommended)
•
One available 3.5" or 5.25" drive bay
•
CD-ROM drive (for driver installation)
•
Windows 98 SE/ME/2000/XP/Server 2003
04-0339A
1
Advertisement
Related Manuals for SIIG USB 2.0 9-in-1 Bay R/W
Summary of Contents for SIIG USB 2.0 9-in-1 Bay R/W
-
Page 1: Quick Installation Guide
USB 2.0 9-in-1 Bay R/W Quick Installation Guide Introducing the Bay Reader/Writer The Bay Reader/Writer is the perfect choice for computer users looking for a flash memory card reader/writer that installs into a front drive bay of the computer. Features and Benefits •... -
Page 2: Package Contents
Package Contents • (1) USB 2.0 9-in-1 Bay Reader/Writer • (1) 5.25 inch mounting rack (black) • (1) 4-pin header-to-type A USB cable • (1) Driver installation CD • (1) Bag assorted mounting screws • (1) Quick installation guide Layout Power/Activity LED* CF/Microdrive... - Page 3 5.25" Mounting Rack Assembly Important: Use the Mounting Rack Assembly only when installing the Bay Reader/Writer into a 5.25" drive bay. Figure 2. 5.25" Mounting Rack Assembly...
- Page 4 4-pin USB Connector Figure 3. 4-pin USB Connector USB Pin-out Header On most motherboards, the USB header/pin-out consists of 9 pins arranged in 2 rows; and each header allows for 2 USB connections (i.e. USB1 and USB2). Normally, the pins for USB1 and USB2 are in seperate rows. USB2 Pin Assignments USB1...
- Page 5 4-pin header-to-type A USB Adapter This USB adapter is only needed if you plan to connect the Bay Reader/Writer to a type A USB port instead of a USB pin-out header. Match up the wires by color when connecting the Bay Reader/Writer's 4-pin USB connector to the 4-pin header, then plug the other end into a type A port.
-
Page 6: Driver Installation
Installing the Bay Reader/Writer Important: In order for the Bay Reader/Writer to work properly, the driver of your existing USB host adapter must be installed properly. Turn OFF the power to your computer and all connected peripheral devices. Unplug the power cord from the back of the computer. - Page 7 Insert the driver CD. Autorun should start the installation. If Autorun does not start, click Start, then Run. Type D:\Autorun.exe, then click OK. (Change D: to match your CD-ROM drive letter) Click Install device, then follow the on-screen instructions to install the driver. Restart the computer to complete the installation.
- Page 8 However, you may choose to install the provided software that labels each drive. If you choose to install this optional software, please follow the directions below. Insert the driver CD. Autorun should start the installation. If Autorun does not start, click Start, then Run.
- Page 9 Click Install device, then follow the on-screen instructions to install the software. Restart the computer to complete the installation. Windows Server 2003 Important: Windows Server 2003 automatically detects and installs the correct drivers for this device. Refer to Accessing Memory Cards, on page 10, for the order in which the memory slots appear.
- Page 10 Verify Mass Storage device: Windows 98SE/ME with optional software: Double click Hard disk controllers, and USB Storage Drive should be displayed. Windows ME with built-in driver: Double click Storage Device and USB Disk should be displayed four times. Windows 2000/XP/Server 2003: Double click Storage volumes and Generic volume should be displayed four times.
-
Page 11: Technical Support
The 5-year manufacturer warranty supplied with this product is offered by SIIG, Inc. If you should happen to encounter any problems with this product, please follow the procedures below. - Page 12 Fremont, CA 94538-3152 USB 2.0 9-in-1 Bay Reader/Writer is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation.