Advertisement
Quick Links
Advertisement
Related Manuals for Pro-Ject Audio Systems T1
Summary of Contents for Pro-Ject Audio Systems T1
- Page 1 INSTRUCTIONS FOR USE Pro-Ject T1 / T1 Phono SB...
- Page 2 However, the packaging materials were chosen to be environmentally friendly, so if you must discard the packaging, please recycle. © Pro-Ject Audio Systems · Pro-Ject T1 / T1 Phono SB · Revision 2019.05.27...
-
Page 3: General Informations
Accessories SINGLE ADAPTOR ALLEN KEY 1,5mm COUNTERWEIGHT no. 56 (already mounted and pre-adjusted) TWO-POINT CARTRIDGE ALIGNMENT PROTRACTOR CONNECTION CABLE (CONNECT IT E RCA) INSTRUCTION FOR USE © Pro-Ject Audio Systems · Pro-Ject T1 / T1 Phono SB · Revision 2019.05.27... - Page 4 © Pro-Ject Audio Systems · Pro-Ject T1 / T1 Phono SB · Revision 2019.05.27...
- Page 5 Blue left channel L- For correct cartridge alignment, use the two-point cartridge alignment protractor provided with your T1 accessories. If unfamiliar with two-point setup, please refer to your dealer. A damaged or worn stylus may harm your record collection and should be replaced.
- Page 6 It is recommended to fit the needle cover before cleaning or maintenance is carried out to avoid damage. If the player is not used over a long period of time the drive belt can be removed to prevent unequal stretching. © Pro-Ject Audio Systems · Pro-Ject T1 / T1 Phono SB · Revision 2019.05.27...
-
Page 7: On/Off Switch
If your amplifier does not have an input suitable for phono cartridges you will require a separate phono amplifier stage for MM or MC cartridges which is then connected between the record player and a free line level input of the amplifier.. © Pro-Ject Audio Systems · Pro-Ject T1 / T1 Phono SB · Revision 2019.05.27... - Page 8 With LINE OUT on, you can use a line input (such as AUX, CD, Tuner, Tape or Video) on your amplifier. With PHONO OUT on, you can use your own phono pre-amplifier (sometimes labelled gram, disc or RIAA). © Pro-Ject Audio Systems · Pro-Ject T1 / T1 Phono SB · Revision 2019.05.27...
- Page 9 Technical specifications MM phono pre-amplifier Gain 34dB Output voltage typically 200mV/1kHz at 5mV/1kHz input Input impedance 47kohms/100pF Noise floor -68dB RIAA-equalisation curve accuracy 20Hz-20kHz / max. 0,5dB © Pro-Ject Audio Systems · Pro-Ject T1 / T1 Phono SB · Revision 2019.05.27...
-
Page 10: Warranty
This guide was produced by: Pro-Ject Audio Systems necessary to uphold the ongoing process of technical Copyright © 2019. All rights reserved. development. © Pro-Ject Audio Systems · Pro-Ject T1 / T1 Phono SB · Revision 2019.05.27... - Page 11 © Pro-Ject Audio Systems · Pro-Ject T1 / T1 Phono SB · Revision 2019.05.27...