Advertisement

Quick Links

INSTRUCTIONS FOR USE
T1 EVO
T1 EVO Phono
T1 EVO BT

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T1 EVO and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Pro-Ject Audio Systems T1 EVO

  • Page 1 INSTRUCTIONS FOR USE T1 EVO T1 EVO Phono T1 EVO BT...
  • Page 2: Table Of Contents

    However, the packaging materials were chosen to be environmentally friendly, so if you must discard the packaging, please recycle. © Pro-Ject Audio Systems · Pro-Ject T1 EVO/ T1 EVO Phono / T1 EVO BT · Revision 28.01.2025...
  • Page 3: General Information

    ALLEN KEY 2mm COUNTERWEIGHT no. 56 TWO-POINT CARTRIDGE ALIGNMENT PROTRACTOR CONNECTION CABLE (CONNECT IT PHONO E RCA) SETUP GUIDE UNIVERSAL POWER SUPPLY © Pro-Ject Audio Systems · Pro-Ject T1 EVO / T1 EVO Phono / T1 EVO BT · Revision 28.01.2025...
  • Page 4 © Pro-Ject Audio Systems · Pro-Ject T1 EVO/ T1 EVO Phono / T1 EVO BT · Revision 28.01.2025...
  • Page 5: Platter And Drive Belt Installation

    33 rpm, press the switch (3) to the “I” position. To play records at 45 rpm, press this switch (3) to the “II”. © Pro-Ject Audio Systems · Pro-Ject T1 EVO / T1 EVO Phono / T1 EVO BT · Revision 28.01.2025...
  • Page 6: Cartridge Installation, Stylus Exchange

    Moving the counterweight (7) away from the cartridge will reduce pressure and towards will increase pressure. Finally secure the counterweight (7) using hexagonal key provided. © Pro-Ject Audio Systems · Pro-Ject T1 EVO/ T1 EVO Phono / T1 EVO BT · Revision 28.01.2025...
  • Page 7: Maintenance And Cleaning

    MM or MC cartridges which is then connected between the record player and a free line level input of the amplifier. © Pro-Ject Audio Systems · Pro-Ject T1 EVO / T1 EVO Phono / T1 EVO BT · Revision 28.01.2025...
  • Page 8: B) T1 Evo Phono

    The earthing wire of the tonearm lead should be connected to the earth terminal on your amplifier (if provided). © Pro-Ject Audio Systems · Pro-Ject T1 EVO/ T1 EVO Phono / T1 EVO BT · Revision 28.01.2025...
  • Page 9: T1 Evo Bt

    For restart of the BT transmitter, please turn OFF and ON the BT module by using the switch. Restart is needed only when there is a change of the BT receiver. © Pro-Ject Audio Systems · Pro-Ject T1 EVO / T1 EVO Phono / T1 EVO BT · Revision 28.01.2025...
  • Page 10: Technical Parameters

    RIAA-equalisation curve accuracy 20Hz-20kHz / max. 0,5dB Class II, 2.5mW (4dBm) per 2.4GHz – 2.48 GHz Maximum transmit power per operated frequency band © Pro-Ject Audio Systems · Pro-Ject T1 EVO/ T1 EVO Phono / T1 EVO BT · Revision 28.01.2025...
  • Page 11: Fcc Id

    Record player is connected to wrong input of amplifier, or MM/MC switch incorrectly set. Needle or cantilever damaged. Wrong r.p.m., drive belt overstretched or dirty, platter bearing without oil, dirty or damaged © Pro-Ject Audio Systems · Pro-Ject T1 EVO / T1 EVO Phono / T1 EVO BT · Revision 28.01.2025...
  • Page 12: Troubleshooting, Warranty, Service

    This guide was produced by: Pro-Ject Audio Systems development. Product images and illustrations can differ Copyright © 2025. All rights reserved. from final production specifications. © Pro-Ject Audio Systems · Pro-Ject T1 EVO/ T1 EVO Phono / T1 EVO BT · Revision 28.01.2025...
  • Page 13: Declaration Of Conformity

    EN61000-3-2:2014, EN61000-3-3:2013 Radio Spectrum: EN300328 V2.1.1 (2016-11) Pro-Ject Audio Systems a division of Audio Tuning GmbH 1050 Vienna, Austria, Margaretenstrasse 98 info@project-audio.com © Pro-Ject Audio Systems · Pro-Ject T1 EVO / T1 EVO Phono / T1 EVO BT · Revision 28.01.2025...
  • Page 14: Exploded View Of The Packaging

    © Pro-Ject Audio Systems · Pro-Ject T1 EVO/ T1 EVO Phono / T1 EVO BT · Revision 28.01.2025...

Table of Contents