Pro-Ject Audio Systems T2 W Setup Manual

T2 W Setup Guide
Getting started:
• Make sure to have enough space to unpack your turntable.
• Always unpack and set up in a clean environment.
• Please Do NOT throw away the packaging! If you need service or
want to return your product, please send it in the original packaging
including all inserts. In case of damage due to alternative packaging
your dealer cannot guarantee a full refund.
• Full manual: www.project-audio.com/en/product/t2w
1
Unpack all items from the accessorie bag.
a) Single adapter
b) Drive belt
c) Connect it E cable
d) Gauge
e) Alignment tool
4
Unpack the power supply unit.
7
Put the drive belt over the sub-platter.
11
Remove tonearm and counterweight protection inlays.
14
Connect to your stereo system. T2 W wireless setup on the back of this paper.
Connect it E RCA cable
to amplifier line input
c)
a) b)
d) e)
5
Unpack glass-platter and felt mat from the bottom of the carton.
8
Put the felt mat on the platter.
Power Cable
2
Remove the dustcover.
12
Remove the red tonearm security tape.
16
Select the playback speed.
33 RPM
45 RPM
3
Remove the turntable from the box.
6
Remove the protective cloth.
10
Remove cartridge cap.
17
Have fun with music!