Pro-Ject Audio Systems T1 Instructions For Use Manual page 9

Take care to connect the left and right channels correctly. The right channel is usually marked red, the left
channel black or white. The earthing wire of the tonearm lead should be connected to the earth terminal on
your amplifier (if provided).
Technical specifications Pro-Ject T1 Phono SB / Pro-Ject 8.6
Nominal speeds
Speed variance
Wow and flutter
Signal to noise
Effective tonearm mass
Effective tonearm length
Overhang
Power consumption
Outboard power supply
Dimensions (W x H x D)
Weight
Dimensions packaging (W x H x D) 488 x 235 x 393mm
Weight incl. packaging
Technical specifications MM-Cartridge Ortofon OM 5E
Frequency range
Channel separation
Output voltage
Recommended load impedance
Compliance/stylus type
Recommended tracking force
Weight
Technical specifications MM phono pre-amplifier
Gain
Output voltage typically
Input impedance
Noise floor
RIAA-equalisation curve accuracy
33/45 r.p.m.
33: ±0.70% 45: ±0.60%
33: ±0.25% 45: ±0.23%
-65dB
8.0g
8.6" (218,5mm)
22,0mm
4,5W
15V/800mA DC, suitable for your country's mains supply
420 x 112 x 330mm
5,0kg
7,0kg
20-25.000Hz
22dB/1kHz
4mV
47kohms/ amplifier connection – MM-input
20µm/mN – elliptical
17,5mN
5g
34dB
200mV/1kHz at 5mV/1kHz input
47kohms/100pF
-68dB
20Hz-20kHz / max. 0,5dB
© Pro-Ject Audio Systems · Pro-Ject T1 / T1 Phono SB · Revision 2019.05.27
9