Table of Contents
Advertisement
February 2019
Figure 5-1: Low Side Pressure Port
A. Low side pressure port (atmospheric reference)
5.2
Turn on device
Check to ensure the device and battery are working properly.
Procedure
1. Twist the cover counterclockwise to remove it.
2. Slide the OFF/ON switch to the ON position to initiate the power
sequence.
Note
During the power sequence, the dial tests full range of motion and LED
flashes amber.
3. Once the power sequence ends, verify that the LED flashes green.
The LED may display several colors; see
Quick Start Guide
A
Quick Start Guide
Device status indicator
.
9
Advertisement
Table of Contents
