Emerson Rosemount WPG: Rosemount SPG Quick Start Manual page 10

Quick Start Guide
5.3 Connect to the device
Image displaying the device connection diagram
A. Field Communicator
B. HART
C. AMS Configurator
5.3.1 AMS Configurator
Procedure to connect the AMS Configurator to the smart pressure gauge.
Procedure
1. Start AMS Configurator.
2. From the View menu, select Device Connection View.
3. Double-click the device under the HART modem.
5.3.2 Field communicator
Procedure to connect the smart pressure gauge to the field communicator.
Procedure
1. Turn on the Field Communicator.
2. From the Main menu, select the HART symbol.
5.4 Eliminate mounting effects
Devices are factory-calibrated. Once installed, it is recommended to perform
this step to eliminate potential error caused by mounting position or static
pressure.
10
®
Modem
February 2019
A
1 2 3
4 5 6
8 9 7
0
B
C
Emerson.com/Rosemount