Mount The Transmitter Head/Probe - Emerson Rosemount 3300 Quick Start Manual

May 2019
2

Mount the transmitter head/probe

2.1 Tank connection with flange
Prerequisites
Note
PTFE covered probes must be handled carefully to prevent damage to the
coating.
Procedure
1. Place a suitable gasket on top of the tank flange.
Note
Gasket should not be used for PTFE covered probe with protective
plate.
2. Lower the transmitter and probe with flange into the tank.
Quick Start Guide
A. PTFE covered probe with protective plate
Quick Start Guide
7