Controls - Ossila Solar Cell I-V Test System User Manual

9.9 Controls

(I) Measure
• Clicking this button will start the measurement using the chosen settings.
• This button cannot be clicked if the software has not detected the test system.
(II) Cancel
• Stops a measurement that is currently in progress.
I. Note that if the measurement is stopped before it completes, the user will be unable to save the
experimental data.
Figure 9.13. Solar Cell Characterisation save data format.
Figure 9.14. Stabilised Current Output save data format.
Figure 9.15. Solar Lifetime Measurement save data.
Figure 9.16. Controls for the measurements.
23