(I)
Save Settings
•
Saves the current settings as a profile that can be loaded quickly for use at another time.
•
When clicked, you will be prompted to name the settings profile.
I. If the name is already in use, you will be asked if you wish to overwrite the previous profile.
II. The name cannot contain the characters: \ / : * ? " < > |
III. You can change the default settings by choosing the name 'Default'.
•
The settings profile will be added to the drop-down box using the given name.
(II)
Load Settings
•
Opens a dialog box to navigate to a settings file that has been created as part of a previous
measurement.
I. The settings fields will be populated with the values in the settings file.
(III)
Settings Profiles
•
Select a saved settings profile from the drop-down box.
I. The settings fields will be populated with the saved values.
•
Settings profiles can be deleted by selecting the profile, and then clicking the red 'delete' icon next to
the drop-down box.
9.8 Saving Results
(I)
Save After Measurement
•
Set whether the measurement data will be saved after the measurement has completed.
Warning: Automatic saving can be turned off for lifetime measurements. However, manual saving
is unavailable for lifetime measurements, so you will not be able to save your data if it is off.
Figure 9.12. Saving measurement data settings.
21