9.2 Software Settings and Controls
There are several settings in the software which must be entered before taking a measurement. These are
found on the panel to the left of the window as shown in Figure 9.2.
9.2.1 Measurement Settings
(I)
Connected Systems
•
Select the COM port of the connected unit you intend to use.
I. This box will be populated automatically with the addresses of any units connected to the
computer when the software starts.
II. To rescan for connected units (in case the connection is changed) click the refresh icon next to
the drop-down box.
14
Figure 9.2. Ossila Cyclic Voltammetry software.
Figure 9.3. Measurement settings.