Optional Sm-Temp Temperature Concentrator, P/N 547490 - Emerson NetSure 721NPBB System Application Manual

SAG582127000
Issue AF, February 26, 2014
P/N 04119122
(10 meter length,
approx. 33 feet)
optional Temp Probe
Extension Cable
P/N 552822
(0.3 meter length,
approx. 1 feet)
Temp Probe
with Short Cable

Optional SM-Temp Temperature Concentrator, P/N 547490

Features
♦ Allows for multiple temperature probes to be used for ambient
temperature monitoring, battery temperature monitoring, temperature
compensation, and/or BTRM (Battery Thermal Runaway
Management).
♦ Provides (8) temperature probe inputs per SM-Temp.
♦ Can cascade up to (8) SM-Temp modules, connecting up to sixty-four
(64) temperature probes.
♦ The SM-Temp Concentrator is connected at the end of the ACU+ CAN bus. Via the CAN Bus, the ACU+
reads each temperature probe from each SM-Temp Concentrator.
Restrictions
Requires ACU+ version 3.02 or later when SM-Temp is connected into the ACU+ CAN bus.
Ordering Notes
1) Order SM-Temp Temperature Concentrator, P/N 547490, as required.
2) Order up to (8) temperature probes for each concentrator. See
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
to Temp Probe
or Temp Probe Extension
Temp Probe Kits
P/N 552992 (includes P/Ns 552822 and 552823)
P/N 556155 (includes P/Ns 552822 and 556154)
Page 52 of 125
System Application Guide
Spec. No. 582127000 (Model 721
to ACU+ Controller
Interface Board
P/N 552823 (10 meter length,
approx. 33 feet) Temp Probe
Controller Side Cable
or
P/N 556154 (3 meter length,
approx. 10 feet) Temp Probe
Controller Side Cable
"Optional Temperature Probe" above.
)
NPBB
Home