Menu Item [2.3 Snack 1] - Unicum FOODBOX User Manual

ТМ

2.4.4.2.3 Menu item [2.3 SNACK 1]

Menu item "2.3 Snack 1" is designed for maintenance and monitoring of Machine's main parameters.
This menu item is hidden if s.c. "1.1.12 Snack number" = 0.
Sub-menu
2.3 Snack 1
2.3.1 Automatic
2.3.2 Test all
2.3.3 Test motor
2.3.4 Temperature
2.3.5 Voltage DC
2.3.6 Lift voltage DC
(not used)
2.3.7 Lift (not used)
2.3.8 Test input
2.3.8.1 Optical sensor
2.3.8.2 Door
2.3.8.3 Tilt
2.3.9 Test siren
2.3.10 Keyboard test
Version 3.4 / November 2016
FOODBOX / FOODBOX LONG
Testing and monitoring of vending machine's main features
Upon entry all motors are reset to initial state, as well as unblocking of all blocked
spirals is performed (which were blocked after failure). it is MANDATORY to select
this menu item before each Machine servicing and zero position adjusting.
On entry tests all cells
Enter cell number.
When you enter, a test sale is executed from the given cell
Shows temperature readings from all three sensors of FOODBOX
Shows the Voltage reading from the power supply circuit (normal value when on
220V – 29.8V)
In this software version the menu item is shown, but has no parameters
This menu item is shown but not used
Testing the Machine's sensors
Shows the state of optical sensors
Shows the state of door's sensor
Shows the state of impact/tilt sensor
Turns ON the alarm for short time
Testing the keypad – shows the result of each key press on the Machine's LCD
Description
Page 60