Changing Shelf Configuration; Replacing A Single Cell Shelf With A Double Cell Shelf - Unicum FOODBOX User Manual

ТМ
4.6.2 Changing shelf configuration
Disconnect the motors and remove the shelf (see section 4.6.1).

4.6.2.1 Replacing a single cell shelf with a double cell shelf

You can see double space shelf, for offering wide dimension products, in figure 41.
To change the shelf configuration you will need 4 motors for two spirals and in addition to the 4 factory
supplied spirals with left hinge, you will need 4 spirals with right hinges. Do as shown in figures 38...39:
4
3
1
Fig.38 - Shelf with single size cells (FOODBOX)
Fig.39 - Shelf with singular cells (FOODBOX LONG)
Fig.40 - Separating the motor connector
Version 3.4 / November 2016
FOODBOX / FOODBOX LONG
• Remove 4 separators by lifting them as shown in figure 38.
2
• Disconnect the motors (see figure 40) and remove all motors with
spirals;
• Remove any four spirals with hinges (see section 4.6.1);
• install the spirals on the motor holder (see section 4.6.1), notably
on one motor – two spirals two spirals with opposite hinge direc-
tions and with similar spool size;
• Install the motors on the shelf and connect them (see figure 40).
Page 74